Gatormyk's latest activity

  • Gatormyk
    Gatormyk replied to the thread Target Altitude Discrepancy.
    Oh I see now... you are talking about the difference in displayed altitude of the traffic near you. I was looking at the "ALT (AGL)" at...
  • Gatormyk
    Gatormyk replied to the thread Target Altitude Discrepancy.
    I consider GPS altitude to be an estimate due to GPS drift. Your screenshots show a 20 ft difference between the two devices. Were you...
  • Gatormyk
    Gatormyk replied to the thread NOTAM mapping.
    Yep. I just watched the Blancolirio YouTube vid about that accident. I upvoted this feature for the safety aspect it would provide.
  • Gatormyk
    If the FAA's AFDs (or whatever their called now) are digitized and indexed, it would be nice if the AFD information about the airport...
  • Gatormyk
    Gatormyk reacted to dsherburn's post in the thread X7 Mounting with Like Like.
    Thanks guys...I ordered an Arkon mount and will use the 4 hole pattern to surface mount to a plate that was fabricated. The plane is in...
  • Gatormyk
    HI Gatormyk, I heard from Chris in tech support. The issue is that the alerts are designed to be silenced when on the ground so as not...
  • Gatormyk
    Are Audio Callouts for Traffic enabled? Menu > Setup > Alerts and Warnings > Audio Callouts > Traffic (checked) Also: Menu > Setup >...
  • Gatormyk
    Gatormyk replied to the thread Black Friday email confusion.
    The email does cover two different iFly EFB tablets. The first one (closest to the top of the email) and labeled "The iFly EFB X7...
  • Gatormyk
    Gatormyk replied to the thread ADS-B receiver compatibility.
    I use the Stratus III. It works pretty good but it does seem susceptible to shutting down due to heat when it is on the glareshield. I...
  • Gatormyk
    Gatormyk replied to the thread X7 Mounting.
    You might consider fabricating a cover plate for that hole with a mounted RAM ball and using a short double socket 1" RAM arm to attach...
  • Gatormyk
    Gatormyk replied to the thread X7 Charging Issues.
    I found this interesting as "Power" and "Volts" are not the same. My understanding was that the USB voltage standard is 5 volts...
Back
Top