740B WIFI Connectivity

divertim

New member
Joined
Jun 24, 2023
Messages
4
Reaction score
0
My new 740B will not connect to WIFI. I watched the videos, read the manual, followed the direction ... and still nothing, even with the unit next to the router/modem.
 
Unfortunately, there are some quirks with the 7xx devices' wifi support.

Does the device at least see that there is a wifi network out there? If not, then there's probably a hardware issue.

If it sees the network, but just won't connect, then do you have any other "known" networks with saved login credentials? (On the 700 and 720, these were annotated with a "(Pre)" in the network name; the 740 also has a way to indicate a "remembered" network, but I think it might say something different--I don't have a 740, so I don't know exactly.)

If it does, try making the 740 "forget" those saved credentials for other networks, and then try again to make your connection. For whatever reason, the 7xx devices don't behave well going back-and-forth between different networks with stored login credentials. It's just better to delete all those stored credentials, and enter them fresh each time you change networks.

What's even better is only ever connecting the 740(b) to a single network (like the one you use in the plane), and don't try going back-and-forth between different networks. If you need to update the data on the 740, pop out the SD card and use iFly Connect on a Windows computer to do that. You can find the link to iFly Connect here: https://iflygps.com/Home/Update-iFly-Portables/Instructions
 
I deleted all profiles (Pre). When the unit is in settings under WIFI, it sees my neighbors' networks but won't see mine. Mine is working just fine as I have multiple devices connected to it.

The WIFI not working on the 740b negates a big reason for purchasing it...being able to update without a computer/card reader.

Very disappointed, I could have purchased a nice iPad and been way ahead.
 
It's very strange that it sees your neighbors' networks but not yours.
 
As a long time user of the 7XX series of equipment, As Cobra says delete all networks except for the aircraft and update the SD card using Ifly connect. At the time I guess that it sounded great, but in reality it just does not work.
 
The other thing is you can mask your SSID. Many access points have a setting called broadcast your network name. Make sure that is checked or turned on. If you are concerned about it from a security standpoint, turn it on and set it up on the 740 then turn it back off. Will work fine after, if that is what the issue is.
 
Did this issue ever get resolved? I have the same problem as divertim. My 740B sees the neighbor's wireless, but not my own. It seems to have started when I replaced my wireless router. I'm computer savy, so know all the basic things to check on the router. Apperently there is an advanced router setting I am missing!
 
Prob way late here to help the OP and some others, but if others now and in the future are scanning older posts to resolve a problem, here is an update for my similar problem I am having with my 740. I had not been flying for a while and it had not been charged or updated, actually would not boot up until it was powered a few min. I normally used my home wifi for chart updates and my cell phone wifi for in flight weather updates at the airport or while flying. I took a look at the internet connections to do an update. Nothing was showing up, guess everything saved dropped off but nothing showed up. I am out in the country, no neighbors close that might show up. When I manually typed in my home connection, nothing. My wifi router is supposed to be transmitting both 2.4 and 5GHz. I then turned on my cell phone Hot Spot. Nothing again.

I downloaded the IFly Connect program and updated to my chip for current charts thinking my wifi function must be dead on my 740. Hate to loose inflight WX and last minute flight plan changes at my airport with no internet. Kept searching. A couple posts on this site mentioned the wifi connection speed 2.4 vs 5.Ghz might be a problem.

Shezam. Opened up my cell phone which has the latest wizzo everything upgrades hot spot and found I have to make a selection to turn on the transmit out of the 2.4GHz along with the 5Ghz wifi. Immediately it popped up on the iFlY tablet. I will need to go into my home wifi router and take a look at what kind of newest latest upgrades have been done to me there to see if I can work around them also.

Technology is wonderful when it is working like we want it to.
 
Back
Top